Sealey SA721 Manual de usuario descargar pdf

1.1. Operational Safety

p WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered

to when using this equipment.

p WARNING!Disconnect from air supply before changing accessories or servicing.

3 Maintain the sander in good condition (use an authorised service agent).

3 Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and

will invalidate the warranty.

3 Use in a suitable clean and tidy work area and ensure there is adequate lighting.

3 Before each use check abrasive pads for condition. If worn or damaged replace immediately.

3 Ensure the abrasive pad rating is the same as, or, greater than the RPM rating of the sander.

3 Ensure there are no flammable or combustible materials near the work area.

p WARNING! Always wear approved eye or face and hand protection when operating the sander.

3 Use face, dust, or respiratory protection in accordance with COSHH regulations.

3 Depending on the task, sander noise level may exceed 85dB, in which case wear safety ear defenders.

3 Remove ill fitting clothing. Remove ties, watches, rings, other loose jewellery and contain and/or tie back long hair.

3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

3 Keep children and unauthorised persons away from the work area.

3 Check moving parts alignment on a regular basis.

3 Ensure workpiece is secure before operating the sander. Never hold a workpiece by hand.

3 Check the workpiece to ensure there are no protruding screws, bolts, nuts, nails, stones, etc.

3 Avoid unintentional starting.

p WARNING! Ensure correct air pressure is maintained and not exceeded. Recommended pressure is 90psi.

3 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure

that all connections are secure.

3 Prolonged exposure to vibration from this sander poses a health risk. It is the owner’s responsibility to

correctly assess the potential hazard and issue guidelines for safe periods of use and offer suitable protective

equipment.

7 DO NOT use the sander for a task it is not designed to perform.

7 DO NOT operate sander if any parts are damaged or missing as this may cause failure and/or personal injury.

p WARNING! DO NOT sand any materials containing asbestos.

7 DO NOT carry the sander by the hose, or yank the hose from the air supply.

7 DO NOT force, or apply heavy pressure to the sander, let the sander do the work.

7 DO NOT place air line attachments close to your face and DO NOT point at other persons or animals.

7 DO NOT operate sander when you are tired or under the influence of alcohol, drugs or intoxicating medication.

7 DO NOT use sander where there are flammable liquids, solids or gases such as paint solvents and including

waste wiping or cleaning rags etc.

7 DO NOT carry the sander with your finger on the power lever.

7 DO NOT direct air from the air hose at yourself or others.

3 When not in use disconnect from air supply and store in a safe, dry, childproof location.

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.

USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

INSTRUCTIONS FOR:

MINI AIR ANGLE ORBITAL SANDER

MODEL No: SA721.V2

1. SAFETY INSTRUCTIONS

1.2. LEAD PAINT WARNING!

Paint once contained lead as a traditional ingredient. The dust caused by the removal of such paint is

toxic and must therefore be avoided. The following action must be taken before using the sander on a

surface that you suspect may contain lead paint.

1. User must determine potential hazard relating to age of paint to be removed (modern paints

do not have lead content).

2. DANGER! Keep all persons and pets away from the working area. The following are

particularly vulnerable to the effects of lead paint dust: Pregnant women, babies and children.

3. We recommend personal protection by using the following safety items:

Paint Spray Respirator (SSP1699), Hooded Coverall (SSP267), Latex Gloves (SSP24).

4. Take adequate measures to contain the paint dust, flakes and scrapings.

5. Continue to wear safety equipment and thoroughly clean all areas when task is complete.

Ensure paint waste is disposed of in sealed bags or containers.

Original Language Version

SA721.V2 Issue: 2(SP) - 15/01/14

1 2 3 4

Indice de contenidos

Pagina 1 - MINI AIR ANGLE ORBITAL SANDER

1.1. Operational Safetyp WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using

Pagina 2 - 4. OPERATING INSTRUCTIONS

Composite lightweight housing reduces effects of chill on operator’s hands. Adjustable speed control on side of motor housing. Air motor with quality

Pagina 3 - 5. MAINTENANCE

p WARNING!Disconnect sander from air supply before changing accessories, servicing or performing maintenance.Replace or repair damaged parts. Use

Pagina 4

WARNING! – Risk of Hand Arm Vibration Injury.This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.This tool is subject

Comentarios a estos manuales

Sin comentarios

Electrolux ESL90600X Instrukcja Użytkownika (24 strony)

Marka: Electrolux | Kategoria: Washing machines | Rozmiar: 0.70 MB |

Spis treści

Lave-vaisselle

Notice d’utilisation

Sommaire

Avertissements importants

Protection de

Comment économiser de

Emplacement

Évacuation d’eau

Raccordement électrique

Description de l’appareil

Le bandeau de commandes

Signaux sonores

L’adoucisseur d’eau

Pour remplir le réservoir:

L’utilisation au quotidien

Le panier inférieur

Le panier à couverts

Le panier supérieur

Différents types de produits

Tableau des programmes

Annuler un programme en cours

8. Vider le lave-vaisselle

Entretien et nettoyage

La vaisselle n’est pas propre

Service Après Vente

Garantie

Plaque signalétique

117992 52/1

Więcej produktów i instrukcji dla Pralki Electrolux

Modele	Rodzaj dokumentu
EDC67150W	Instrukcja Użytkownika Electrolux EDC67150W Benutzerhandbuch, 32 strony
ESF65010	Instrukcja Użytkownika Electrolux ESF65010 Manuel utilisateur, 48 strony
EWT1212	Instrukcja Użytkownika Electrolux EWT1212 用户手册 [el] , 88 strony
EW811F	Instrukcja Użytkownika Electrolux EW811F User Manual, 21 strony
ESI66010X	Instrukcja Użytkownika Electrolux ESI66010X Manuel utilisateur, 28 strony
ESF67060XR	Instrukcja Użytkownika Electrolux ESF67060XR Manuel utilisateur, 20 strony
ESF2440	Instrukcja Użytkownika Electrolux ESF2440 User Manual, 16 strony
ESF8585ROX	Instrukcja Użytkownika Electrolux ESF8585ROX Uživatelský manuál, 72 strony
EWW1292 FOR APPROVAL	Instrukcja Użytkownika Electrolux EWW1292 FOR APPROVAL User Manual, 30 strony
EWG147540W	Instrukcja Użytkownika Electrolux EWG147540W User Manual, 32 strony
EFLW317TIW	Instrukcja Użytkownika Electrolux EFLW317TIW Tech Data Sheet, 20 strony
EFLW317TIW	Przewodnik Właściciela Electrolux EFLW317TIW Owner's Guide, 32 strony
EW527F	Instrukcja Użytkownika Electrolux EW527F User Manual [en] , 19 strony
EWT113	Instrukcja Użytkownika Electrolux EWT113 User Manual, 31 strony
EW855F	Instrukcja Użytkownika Electrolux EW855F User Manual, 15 strony
EFLS627UTT	Arkusz Specyfikacji Electrolux EFLS627UTT Spec Sheet, 3 strony
EFLS527UIW	Arkusz Specyfikacji Electrolux EFLS527UIW Spec Sheet, 3 strony
EWDF10F5DGMW	Instrukcja Użytkownika Electrolux EWDF10F5DGMW Manual de usuario, 11 strony
EWF10180W	Instrukcja Użytkownika Electrolux EWF10180W User Manual, 34 strony
EWF1220	Instrukcja Użytkownika Electrolux EWF1220 Uživatelský manuál, 120 strony